Welcome to Sino Bearings web
24x7 SERVICE:sales@sinobearings.com

NEWS

INDUSTRY NEWS

Cleaning methods for ceramic bearings

From:SINO BEARINGS2022-10-14
I. Cleaning and fine washing of ceramic bearings
 
Just use the ceramic bearing accidentally into the lubricating oil how to clean it? First of all, we should record the appearance of the ceramic bearing, confirm the residual amount of lubricant, sample and check the lubricant used, and clean the ceramic bearing. As cleaning agent, gasoline and kerosene are commonly used.
 
1. Cleaning of ceramic bearings
 
The cleaning of the removed ceramic bearings is divided into coarse cleaning and fine cleaning, which are respectively placed in the container. The metal mesh bottom is put first, so that the ceramic bearings do not directly contact the dirt of the container. When rough cleaning, if the ceramic bearing rotates with dirt, it will damage the moving surface of the ceramic bearing, which should be paid attention to. In the crude cleaning oil, use a brush to remove grease, sticky matter, roughly clean, into fine washing.
 
2. Fine cleaning of ceramic bearings
 
Fine washing is to rotate the ceramic bearing in the cleaning oil while carefully cleaning it. In addition, cleaning oil should always be kept clean.
 
Two, the problem of lubrication and cleaning
 
1. Why should lubricating oil be cleaned?
 
The use of ceramic bearings and ceramic bearing environment there can be no lubricating oil, it involves the ceramic bearing cleaning problems, here is simple easy-to-read can according to the properties of the ceramic bearing internal existing lubricating oil for neutralization or conventional solution principle or emulsification, can achieve clean, if there is no use environment there can be no lubricating oil, The lubricating oil can be used as a lubricating medium, because as long as it is liquid, it can be used as a ceramic bearing lubrication medium.
 
2, there are granular impurities in the lubricating oil that affect the use of bearings and need to be cleaned?
 
When the bearing is run a risk of impurities into the inside, we have to consider not clean bearing problem, but need to analyze the source of impurity and how to prevent debris from getting into the possibility of bearing as possible problems, such as ceramic bearing is soaked in a solution using mostly, this time, as long as you need to add a filter in a certain position in the solution.
 
3, how to use ceramic bearings in the environment there are impurities/particles/dust problems?
 
How to use ceramic bearings in the environment there are impurities/particles/dust problems? This problem is the sealing problem of ceramic bearings