Miniature bearings are suitable for all kinds of industrial equipment, small rotary motors and other fields of high speed and low noise, such as:
Office equipment, micro motor, instrument, laser engraving, small clock, soft drive, pressure rotor, dental drill, hard disk motor, stepping motor, VIDEO recorder magnetic drum, toy model, computer cooling fan, money counting machine, fax machine and other related fields
Matters needing attention:
1. Place the yoke iron on the end face of the host.
2. Insert the plug into the power socket with the control switch.
3, check whether the grounding wire is good, after the power test with a test pen.
4, press the start button, the host power.
5, check yoke iron should have no voltage to the ground.
6. Press the stop button to power off the host and stop heating.
7, according to different specifications of miniature bearings or other workpiece, choose different yoke set, put the yoke iron on the top of the host, should be consistent and smooth.
8. When heating the miniature bearing, the sensor should be inserted into the "sensing socket", and the sensor should be close to the heated workpiece。