Fixtureworks now offers Fairlane® Products urethane covered bearings in both inch and metric sizes for smooth, quiet and non-marring operation. The inch and metric sizes are offered in two styles, single bearing and double bearing. The single bearing style is available in diameter sizes from 0.750 to 3 in. and from 20 to 70 mm. Widths range from 0.196 to 0.563 in and 5 to 12 mm. The double bearing style is available in diameters from 0.750 to 3.00 in. and 20 to 70 mm, with widths from 0.392 to 1.125 in and 10 to 24 mm. Durometers are available from 35 to 95 in both inch and metric sizes. The urethane covered bearings are also available with stud mount. These covered bearings also have a smooth urethane surface. They come assembled with a button head cap screw, spacer and locknut for easy mounting. The stud mounts, also available in metric sizes, are available in diameters from 0.875 to 2.00 and 20 to 50 mm with stud sizes ranging from 1⁄4 to 5/8 in. and M5 to M12, durometers from 35 to 95. Besides the Fairlane® Products urethane covered bearings, Fixtureworks offers Fairlane® Products full line of grippers, rest pads, Swivots® swivel/pivoting positioning components, Quick Release ball-lock pins, rollers and bumpers; Kipp® rest and riser pads, levers, handles, knobs, and hand wheels; Imao® O.D. Clamps, manual clamps, supports and stops, risers, T-nuts, sliding mounts, springs, supports, grid plates and blocks; OK-Vise® single and double wedge clamp designs; Mitee-Bite® low-profile edge clamps. FixtureWorks www.fixtureworks.net