The centripetal joint bearing is a kind of joint bearing.

(1) Ge... E Type 

Single outer ring, no lubricating oil groove. It can bear radial load and small axial load in either direction.

(2) Ge... Es type

Single seam outer ring with lubricating oil groove. It can bear radial load and small axial load in either direction.

(3) Ge... Es-2rs type

Single seam outer ring with lubricating oil groove and sealing rings on both sides. It can bear radial load and small axial load in either direction.

(4) Geew... Es-2rs type

Single seam outer ring with lubricating oil groove and sealing rings on both sides. It can bear radial load and small axial load in either direction.

(5) Ge... ESN type

The single seam outer ring is provided with lubricating oil groove and the outer ring is provided with stop groove. It can bear radial load and small axial load in either direction. However, when the axial load is borne by the stop ring, its ability to bear the axial load is reduced.

(6) Ge... Xsn type

Double slit outer ring (split outer ring), with lubricating oil groove, and the outer ring has stop groove. It can bear radial load and small axial load in either direction. However, when the axial load is borne by the stop ring, its ability to bear the axial load is reduced.

(7) Ge... HS type

The inner ring has lubricating oil groove and double half outer ring. The clearance can be adjusted after wear. It can bear radial load and small axial load in either direction.

(8) Ge... Type DE1

The inner ring is hardened bearing steel and the outer ring is bearing steel. When the inner ring is assembled, it is extruded, with lubricating oil groove and oil hole. Bearings with inner diameter less than 15mm have no lubricating oil groove and oil hole. It can bear radial load and small axial load in either direction.

(9) Ge... Dem1 type

The inner ring is hardened bearing steel and the outer ring is bearing steel. When the inner ring is assembled, it is extruded. After the bearing is installed into the bearing seat, the end groove is pressed out on the outer ring to fix the bearing axially. It can bear radial load and small axial load in either direction.

(10) Ge... DS type

The outer ring has assembly groove and lubrication groove. Limited to large bearings. It can bear radial load and small axial load in either direction (one side of the assembly groove cannot bear axial load).