Welcome to Sino Bearings web
24x7 HOTLINE：+86-28-81454188
TECHNOLOGY
FREQUENT Q/A
How the right bearings can drive performance for automotive A single car has about 30,000 components, from major body structures down to individual bolts and screws. Every part has an integral role in keeping a car running, and this goes fo...
A, sealed classification Seals can be divided into two categories: static seal between relatively static joint surfaces and dynamic seal between relatively moving joint surfaces. The sealing part of the static seal is static, such as pipe f...
Who are the top automotive suppliers in Germany and which are the largest worldwide? Definition, examples, trends and industry knowledge — simply explained and at a glance! Automotive supplier aredefined as:Companies that manufacture good...
Cleaning of ceramic bearings When disassembling the ceramic bearing for inspection, first record the appearance of the ceramic bearing, confirm the residual amount of lubricant, sample the lubricant used for inspection, and wash the ceramic...
Classification of ceramic ball bearings: According to material: ceramic bearings can be divided into zirconia ceramic bearings, silicon nitride ceramic bearings, composite ceramic material bearings. According to the structure: ceramic beari...
The commonly used materials of oil seal are: nitrile rubber, fluorine rubber, silicone rubber, acrylic rubber, polytetrafluoroethylene and so on. 1, nitrile rubber has good heat resistance, wear resistance, resistance to all kinds of lubric...
Adjustment of axial clearance For the installation of tapered roller bearings, the axial clearance can be adjusted by the adjusting nut on the journal, the thread in the hole of the adjusting gasket and the bearing seat, or by a preloaded s...
Generally speaking, the bearing seat can be divided into outer spherical bearing seat, integral bearing seat, split type bearing seat, split vertical bearing seat, rolling bearing seat, sliding bearing seat, bearing seat with flange, etc. F...
1. When the one-way bearing is removed for inspection, the appearance record should be made by taking pictures and other methods. 2. In addition, it is necessary to confess the amount of remaining lubricant and sample the lubricant before c...
1. Appearance quality The surface of the sample should be free of bubbles, burrs, deformation, uniform material and pungent odor. 2, size (1) Relevant dimensions tested with vernier calipers shall conform to relevant technical and drawing r...
