Welcome to Sino Bearings web
24x7 HOTLINE：+86-28-81454188
TECHNOLOGY
FREQUENT Q/A
What effect does the amount of grease in bearings have on the use of bearings...
What are the important links in the production process of bearings?...
First, scar sound and its control method 2.Dust sound and its control methods...
It is estimated that reducing friction by 10% in all large bearings used would provide the energy equivalent to the output of 18 large power stations. Reducing friction in bearings of any size is a key way to improve energy efficiency. Here...
What are the common failures of turntable bearings...
1, channel unilateral limit position peeling The extreme position spalling of gully is mainly manifested in the serious spalling zone at the junction of gully and retaining edge. The reason is that the bearing is not installed in place or s...
Bearing accuracy is mainly divided into dimensional accuracy and rotation accuracy. The accuracy level has been standardized, divided into P0, P6, P5, P4, P2 five levels. Accuracy increases from level 0, which is sufficient for general use,...
Engineering machinery is inseparable from the cylinder, cylinder and seal, the common seal is the seal ring, also known as oil seal, play the role of isolation of oil, prevent oil overflow or through. Common sealing ring for hydraulic cylin...
Tapered roller bearings belong to separation bearings, bearing inner and outer rings have tapered raceway. The bearings can be divided into single row, double row and four row tapered roller bearings according to the number of roller rows....
The fit of thrust bearing and shaft is generally transition fit, and the fit of seat ring and bearing seat hole is generally clearance fit. The middle shaft ring of bi-directional thrust bearing should be fixed on the shaft to prevent rotat...
